What To Know
- If the control board is faulty, it may not be able to send the correct signals to the drain pump, causing the dishwasher to stop draining.
- If the drain hose is clear, the next step is to test the drain pump.
- If the drain hose, drain pump, and air gap are all clear, the next step is to check the control board.
Dishwashers are a lifesaver when it comes to cleaning dishes, but when they start to malfunction, it can be a major inconvenience. One of the most common problems with dishwashers is that they stop draining, leaving you with a sink full of dirty water and dishes.
If you’re experiencing this issue with your Samsung dishwasher, don’t worry – you’re not alone. In this blog post, we’ll walk you through the most common reasons why your Samsung dishwasher might not be draining and provide step-by-step instructions on how to fix the problem.
There are a few common reasons why your Samsung dishwasher might not be draining properly. These include:
- Clogged drain hose: The drain hose is responsible for carrying the dirty water out of the dishwasher. If the drain hose is clogged, the water will not be able to drain properly.
- Faulty drain pump: The drain pump is responsible for pumping the dirty water out of the dishwasher. If the drain pump is faulty, it will not be able to pump the water out properly.
- Damaged or blocked air gap: The air gap is a small device that helps to prevent dirty water from flowing back into the dishwasher. If the air gap is damaged or blocked, it can cause the dishwasher to stop draining properly.
- Faulty control board: The control board is the brains of the dishwasher. If the control board is faulty, it may not be able to send the correct signals to the drain pump, causing the dishwasher to stop draining.
Troubleshooting and Solutions
Now that you know the most common reasons why your Samsung dishwasher might not be draining, let’s take a look at how to troubleshoot and fix the problem.
1. Check the Drain Hose for Clogs
The first thing you should do is check the drain hose for clogs. To do this, follow these steps:
1. Disconnect the drain hose from the dishwasher.
2. Inspect the drain hose for any clogs. If you see any clogs, remove them with a plumber’s snake or a pair of pliers.
3. Reconnect the drain hose to the dishwasher.
2. Test the Drain Pump
If the drain hose is clear, the next step is to test the drain pump. To do this, follow these steps:
1. Open the dishwasher door.
2. Locate the drain pump. The drain pump is usually located at the bottom of the dishwasher, near the back.
3. Use a multimeter to test the drain pump. If the drain pump is faulty, it will need to be replaced.
3. Check the Air Gap
The next thing you should check is the air gap. To do this, follow these steps:
1. Locate the air gap. The air gap is usually located on the countertop, near the sink.
2. Inspect the air gap for any damage or blockages. If the air gap is damaged or blocked, it will need to be replaced.
4. Check the Control Board
If the drain hose, drain pump, and air gap are all clear, the next step is to check the control board. To do this, follow these steps:
1. Open the dishwasher door.
2. Locate the control board. The control board is usually located behind the front panel of the dishwasher.
3. Inspect the control board for any damage or loose connections. If the control board is damaged or has loose connections, it will need to be replaced.
Conclusion: Troubleshooting Samsung Dishwasher Not Draining
If you’ve followed the steps above and you’re still having problems with your Samsung dishwasher not draining, you may need to call a qualified appliance repair technician. However, in most cases, you should be able to fix the problem yourself by following the steps in this blog post.
