Unraveling The Mystery: Why Is My Kitchenaid Dishwasher Flashing Clean? Discover The Simple Solution!

If you’re a KitchenAid dishwasher owner, you may have encountered a situation where the “Clean” light on your dishwasher starts flashing. This can be a frustrating experience, especially if you’re not sure what’s causing the issue.

In this blog post, we’ll explore some of the most common reasons why your KitchenAid dishwasher might be flashing “Clean” and provide some troubleshooting tips to help you resolve the problem.

One of the most common reasons for a KitchenAid dishwasher to flash “Clean” is a clogged drain hose. Over time, food particles and other debris can accumulate in the drain hose, causing it to become clogged. This can prevent the dishwasher from draining properly, which can lead to the “Clean” light flashing.

To check if your drain hose is clogged, disconnect it from the dishwasher and inspect it for any blockages. If you find any clogs, use a plumber’s snake or a pair of pliers to remove them.

2. Faulty Drain Pump

Another potential cause of a flashing “Clean” light on a KitchenAid dishwasher is a faulty drain pump. The drain pump is responsible for pumping water out of the dishwasher, and if it fails, the dishwasher will not be able to complete the cleaning cycle.

To test the drain pump, disconnect it from the dishwasher and connect it directly to a power source. If the pump does not run, it is likely faulty and needs to be replaced.

3. Faulty Water Inlet Valve

The water inlet valve is responsible for supplying water to the dishwasher. If the valve is faulty, it may not be able to open properly, which can prevent the dishwasher from filling up with water. This can lead to the “Clean” light flashing.

To test the water inlet valve, disconnect it from the dishwasher and connect it directly to a water source. If water does not flow through the valve, it is likely faulty and needs to be replaced.

4. Faulty Control Board

The control board is the brain of the dishwasher, and it is responsible for controlling all of the dishwasher’s functions. If the control board is faulty, it may not be able to properly send signals to the other components of the dishwasher, which can lead to the “Clean” light flashing.

To test the control board, you will need to use a multimeter to check for continuity between the control board and the other components of the dishwasher. If there is no continuity, the control board is likely faulty and needs to be replaced.

5. Software Glitch

In some cases, a flashing “Clean” light on a KitchenAid dishwasher may be caused by a software glitch. This can be resolved by resetting the dishwasher. To reset the dishwasher, simply unplug it from the power outlet for a few minutes and then plug it back in.

Troubleshooting Tips

If you are unable to resolve the flashing “Clean” light on your KitchenAid dishwasher by following the steps above, you may need to contact a qualified appliance repair technician for assistance.

Here are some additional troubleshooting tips that may help you resolve the issue:

• Check the dishwasher’s door latch to make sure it is properly closed.
• Make sure that the dishwasher is getting enough power.
• Check the dishwasher’s water supply to make sure that it is turned on and that there is adequate water pressure.
• Clean the dishwasher’s filter to remove any food particles or debris that may be clogging it.
• Try running the dishwasher through a rinse cycle to see if that resolves the issue.

Wrapping Up

If you are experiencing a flashing “Clean” light on your KitchenAid dishwasher, there are a few things you can do to try to resolve the issue. By following the troubleshooting tips in this blog post, you may be able to fix the problem yourself. However, if you are unable to resolve the issue, you may need to contact a qualified appliance repair technician for assistance.