What To Know
- The Clean light indicator on your KitchenAid dishwasher serves as a visual cue to inform you about the status of your dishwasher’s cleaning cycle.
- If the drain pump is malfunctioning, it may not be able to drain the water effectively, resulting in a blinking Clean light.
- If you have tried the troubleshooting steps above and the Clean light is still blinking, it is advisable to contact a qualified appliance repair technician.
The Clean light indicator on your KitchenAid dishwasher serves as a visual cue to inform you about the status of your dishwasher’s cleaning cycle. Typically, the Clean light will illuminate once the dishwasher has successfully completed its cleaning cycle. However, if you notice that the Clean light is blinking, it indicates that there may be an issue with your dishwasher.
Common Causes for Blinking Clean Light
1. Incomplete Cycle: If the Clean light is blinking, it could mean that the dishwasher did not complete its cleaning cycle properly. This can occur due to various reasons, such as a power outage, a clogged drain hose, or a faulty door latch.
2. Clogged Filter: A clogged filter can prevent the dishwasher from draining properly, leading to a blinking Clean light. Food particles, debris, and grease can accumulate in the filter over time, causing blockages.
3. Faulty Drain Pump: The drain pump is responsible for draining the water from the dishwasher. If the drain pump is malfunctioning, it may not be able to drain the water effectively, resulting in a blinking Clean light.
4. Defective Control Board: The control board is the brain of the dishwasher, managing various functions, including the cleaning cycle. A faulty control board can cause the Clean light to blink due to communication issues between different components of the dishwasher.
5. Damaged Door Latch: A damaged or misaligned door latch can prevent the dishwasher from closing securely. This can lead to water leaks and a blinking Clean light.
Troubleshooting Steps
1. Check for Incomplete Cycle: Ensure that the dishwasher has completed its cleaning cycle. If the cycle was interrupted, restart the dishwasher and allow it to run through the entire cycle.
2. Clean the Filter: Locate the filter in your dishwasher and remove it. Rinse the filter thoroughly under running water to remove any food particles or debris. Reinstall the filter securely.
3. Inspect the Drain Hose: Check the drain hose for any kinks or clogs. Straighten out any kinks and remove any obstructions from the hose.
4. Test the Drain Pump: To test the drain pump, pour a gallon of water into the dishwasher and close the door. Select a short wash cycle and start the dishwasher. If the water drains properly, the drain pump is likely functioning correctly.
5. Inspect the Door Latch: Examine the door latch for any damage or misalignment. Ensure that the door closes securely and that the latch engages properly.
When to Call a Professional
If you have tried the troubleshooting steps above and the Clean light is still blinking, it is advisable to contact a qualified appliance repair technician. Attempting to repair complex issues without proper knowledge and experience can lead to further damage to your dishwasher.
Wrapping Up: Ensuring a Properly Functioning KitchenAid Dishwasher
A blinking Clean light on your KitchenAid dishwasher can be a sign of various issues, ranging from minor inconveniences to more serious problems. By following the troubleshooting steps outlined in this blog post, you can identify the potential cause of the issue and take appropriate action to resolve it. If the problem persists or if you are unsure about the diagnosis, do not hesitate to seek assistance from a professional appliance repair technician. Remember, a well-maintained dishwasher will not only keep your dishes sparkling clean but also extend the lifespan of your appliance.
