What To Know
- You can test the outlet with a different appliance or use a voltage meter to ensure that it is providing the correct voltage.
- Clean the control panel with a mild detergent and a soft cloth, and make sure to dry it thoroughly before using the dishwasher.
- The electronic control board is the brain of the dishwasher, and it controls all of the dishwasher’s functions.
KitchenAid dishwashers are known for their reliability and efficiency, but even the best appliances can experience occasional problems. If you find that the buttons on your KitchenAid dishwasher are not working, there are a few common causes and solutions you can try before calling for service.
1. Power Supply Issues
- Check the power cord: Make sure that the power cord is properly plugged into an outlet and that the outlet is receiving power. You can test the outlet with a different appliance or use a voltage meter to ensure that it is providing the correct voltage.
- Reset the circuit breaker: If the circuit breaker that powers the dishwasher has tripped, reset it. The circuit breaker is usually located in the main electrical panel of your home.
- Check the fuse: If your dishwasher is connected to a fuse, check to see if the fuse has blown. If the fuse has blown, replace it with a new fuse of the same amperage rating.
2. Control Panel Issues
- Clean the control panel: Sometimes, the buttons on the control panel can become dirty or greasy, which can prevent them from working properly. Clean the control panel with a mild detergent and a soft cloth, and make sure to dry it thoroughly before using the dishwasher.
- Check the connections: The control panel is connected to the dishwasher’s electronic control board by a series of wires. Check the connections to make sure that they are secure and that there are no loose wires.
- Replace the control panel: If the control panel is damaged or malfunctioning, it may need to be replaced. This is a job that is best left to a qualified appliance repair technician.
3. Electronic Control Board Issues
- Reset the electronic control board: The electronic control board is the brain of the dishwasher, and it controls all of the dishwasher’s functions. Sometimes, the electronic control board can be reset by unplugging the dishwasher for a few minutes and then plugging it back in.
- Replace the electronic control board: If the electronic control board is damaged or malfunctioning, it will need to be replaced. This is a job that is best left to a qualified appliance repair technician.
4. Other Possible Causes
- Door latch: If the door latch is not properly engaged, the dishwasher will not start. Make sure that the door is closed tightly and that the door latch is engaged.
- Water supply: The dishwasher needs a constant supply of water to operate properly. Check the water supply line to make sure that it is not kinked or blocked. You can also check the water pressure by turning on the kitchen sink faucet. If the water pressure is low, it may be necessary to adjust the pressure regulator.
- Drain hose: The dishwasher also needs a drain hose to dispose of the wastewater. Check the drain hose to make sure that it is not kinked or blocked. You can also check the drain hose by pouring a cup of water into the dishwasher. If the water does not drain out, the drain hose may be clogged.
Conclusion: Troubleshooting KitchenAid Dishwasher Buttons
If you have tried all of the above troubleshooting tips and the buttons on your KitchenAid dishwasher are still not working, it is time to call for service. A qualified appliance repair technician can diagnose the problem and repair your dishwasher quickly and efficiently.
