Uncover The Truth: How To Test Kitchenaid Dishwasher Heating Element And Ensure Spotless Dishes

A KitchenAid dishwasher is a valuable appliance that makes cleaning dishes a breeze. However, if the heating element fails, your dishwasher won‘t be able to properly clean your dishes. In this blog post, we’ll provide a comprehensive guide on how to test the KitchenAid dishwasher heating element. By following these steps, you can easily determine if the heating element is faulty and needs to be replaced.

Safety Precautions

Before you begin testing the heating element, it’s important to take the following safety precautions:

• Unplug the dishwasher from the power outlet. This will prevent any electrical shock hazards.
• Turn off the water supply to the dishwasher. This will prevent water from leaking out while you’re working on the dishwasher.
• Wear gloves and safety glasses. This will protect your hands and eyes from any sharp edges or chemicals.

Testing the Heating Element

Once you’ve taken the necessary safety precautions, you can begin testing the heating element. Here are the steps involved:

1. Remove the lower access panel. The lower access panel is usually located at the bottom of the dishwasher door. Use a screwdriver to remove the screws that hold the panel in place.
2. Locate the heating element. The heating element is typically located at the bottom of the dishwasher tub. It’s a metal coil that’s surrounded by a plastic housing.
3. Disconnect the wires from the heating element. Use a pair of pliers to disconnect the wires from the heating element. Be careful not to touch the metal terminals on the heating element, as they can be hot.
4. Test the heating element with a multimeter. Set your multimeter to the ohms setting. Touch one probe of the multimeter to each of the terminals on the heating element. If the multimeter reads “OL” (open line), then the heating element is faulty and needs to be replaced.
5. Reattach the wires to the heating element. Once you’ve confirmed that the heating element is faulty, you can reattach the wires to the heating element. Be sure to tighten the screws securely.
6. Replace the lower access panel. Once you’ve reattached the wires to the heating element, you can replace the lower access panel. Be sure to tighten the screws securely.

Additional Tips

Here are a few additional tips for testing the KitchenAid dishwasher heating element:

• If you’re not comfortable working on electrical appliances, you can call a qualified appliance repair technician to test the heating element for you.
• If you need to replace the heating element, be sure to purchase a genuine KitchenAid replacement part. This will ensure that the new heating element is compatible with your dishwasher.
• Once you’ve replaced the heating element, test the dishwasher to make sure it’s working properly.

Conclusion: Ensuring Optimal Dishwasher Performance

By following the steps outlined in this guide, you can easily test the KitchenAid dishwasher heating element and determine if it needs to be replaced. By addressing heating element issues promptly, you can ensure that your dishwasher continues to deliver optimal performance, leaving your dishes sparkling clean. Remember, regular maintenance and timely repairs are crucial for extending the lifespan of your KitchenAid dishwasher and maintaining its efficiency.