What To Know
- Stitch the hem in place, leaving a 3-inch opening in the center for the elastic cord.
- Yes, you can use different fabrics for the skirt and the top of the cover to create a contrasting effect.
- Once you have inserted the elastic cord through the opening in the top hem, pull both ends of the cord to tighten it.
Elevate your kitchen decor and protect your prized KitchenAid stand mixer with a stylish, custom-sewn cover. This comprehensive guide will walk you through the entire process, from choosing fabrics and materials to creating a perfectly fitted cover.
Materials You’ll Need
- Fabric of your choice (1-2 yards, depending on mixer size)
- Coordinating thread
- Measuring tape or ruler
- Fabric scissors
- Sewing machine
- Iron and ironing board
- Pins
- Elastic cord (1/4 inch wide)
- Toggle stoppers (optional)
Step 1: Measure and Cut the Fabric
- Measure the height, width, and depth of your stand mixer.
- Add 2 inches to each measurement for seam allowances.
- Cut two rectangles of fabric according to these measurements.
Step 2: Create the Skirt
- Fold the bottom edge of one rectangle up by 1 inch and press. Fold it up again by 1 inch and press again. Stitch the hem in place.
- This will create the “skirt” of the cover.
Step 3: Sew the Sides
- Place the two rectangles right sides together and pin around the sides.
- Stitch the sides together with a 1/2-inch seam allowance.
Step 4: Finish the Top Edge
- Fold the top edge of the cover down by 1 inch and press. Fold it down again by 1 inch and press again.
- Stitch the hem in place, leaving a 3-inch opening in the center for the elastic cord.
Step 5: Insert the Elastic Cord
- Cut a piece of elastic cord to the circumference of your stand mixer, plus 4 inches.
- Thread the elastic cord through the opening in the top hem.
- Secure the ends of the elastic cord with toggle stoppers or by sewing them together.
Step 6: Hem the Skirt
- Fold the bottom edge of the skirt up by 1 inch and press. Fold it up again by 1 inch and press again.
- Stitch the hem in place.
Step 7: Fit the Cover
- Place the cover over your stand mixer and adjust the elastic cord to ensure a snug fit.
- Your custom-sewn KitchenAid stand mixer cover is complete!
Tips for Choosing Fabric
- Choose a fabric that complements your kitchen decor and is durable enough to withstand frequent use.
- Cotton, linen, and canvas are popular choices for mixer covers.
- If you want a more decorative cover, consider using a patterned or textured fabric.
Creative Embellishments
- Add a touch of flair to your cover by adding ruffles, lace, or embroidery.
- Stitch on appliqués or fabric paint to create a unique design.
- Use different fabrics for the skirt and the top to create a contrasting effect.
Care and Maintenance
- To clean the cover, remove the elastic cord and hand wash or machine wash on a gentle cycle.
- Tumble dry on low or air dry.
- Iron on a low heat setting to remove wrinkles.
Finishing Touches
- Add a coordinating apron or oven mitt to complete the look of your kitchen.
- Display your stand mixer on a shelf or countertop for a stylish touch.
Basics You Wanted To Know
- What size fabric do I need for a KitchenAid stand mixer cover?
The size of fabric you need will depend on the size of your mixer. For a standard 5-quart mixer, you will need approximately 1-2 yards of fabric.
- Can I use a different type of fabric for the skirt and the top?
Yes, you can use different fabrics for the skirt and the top of the cover to create a contrasting effect.
- How do I adjust the elastic cord to fit my mixer?
Once you have inserted the elastic cord through the opening in the top hem, pull both ends of the cord to tighten it. Secure the ends of the cord with toggle stoppers or by sewing them together.
