Kitchenaid Dishwasher Clean Light Flashing? Here’s How To Reset It In Minutes
What To Know
- In this comprehensive guide, we’ll delve into the various reasons why the Clean light might be flashing on your KitchenAid dishwasher and provide step-by-step instructions to help you resolve the issue.
- – A malfunctioning door latch can cause the Clean light to flash, as the dishwasher won’t be able to detect that the door is properly closed.
- This can cause the Clean light to flash, as the detergent may not be able to dissolve properly or may leave a residue on the dishes.
KitchenAid dishwashers are renowned for their efficiency and reliability. However, like any appliance, they can occasionally encounter issues. One common problem that users may face is the flashing of the “Clean” light. This can be a frustrating experience, especially if you’re not sure what’s causing it. In this comprehensive guide, we’ll delve into the various reasons why the Clean light might be flashing on your KitchenAid dishwasher and provide step-by-step instructions to help you resolve the issue.
Common Causes of Flashing Clean Light in KitchenAid Dishwashers:
1. Dirty or Clogged Filter:
– The filter in your dishwasher plays a crucial role in trapping food particles and debris to prevent them from recirculating through the system. Over time, the filter can become clogged with food residue, grease, and other debris, causing the Clean light to flash.
2. Malfunctioning Drain Pump:
– A faulty drain pump can prevent the dishwasher from draining properly, resulting in a flashing Clean light. This issue can be caused by a variety of factors, including a clogged drain hose, a defective pump motor, or a faulty control board.
3. Faulty Door Latch:
– A malfunctioning door latch can cause the Clean light to flash, as the dishwasher won‘t be able to detect that the door is properly closed. This can be due to a damaged door latch assembly, a misaligned door, or a faulty door switch.
4. Overloaded Dishwasher:
– If you overload your dishwasher with too many dishes or utensils, it may not be able to clean them effectively. This can cause the Clean light to flash, as the dishwasher struggles to complete the cycle properly.
5. Incorrect Detergent Usage:
– Using the wrong type of detergent or an excessive amount of detergent can lead to issues with the dishwasher’s cleaning performance. This can cause the Clean light to flash, as the detergent may not be able to dissolve properly or may leave a residue on the dishes.
Troubleshooting Steps for Flashing Clean Light:
1. Check the Filter:
– Start by inspecting the dishwasher’s filter. Remove the filter and clean it thoroughly under running water. Make sure to remove any food particles, grease, or debris that may be clogging the filter.
2. Inspect the Drain Hose and Pump:
– Check the drain hose for any kinks or clogs. If the hose is clear, inspect the drain pump for any signs of damage or wear. If the pump is faulty, it may need to be replaced.
3. Examine the Door Latch:
– Inspect the door latch assembly for any damage or misalignment. Ensure that the door is closing properly and that the latch is engaging securely. If the latch is faulty, it may need to be replaced.
4. Avoid Overloading the Dishwasher:
– Load the dishwasher properly, ensuring that there is enough space between dishes and utensils for the water and detergent to circulate effectively. Avoid overloading the dishwasher, as this can hinder the cleaning process.
5. Use the Correct Detergent:
– Use the recommended type and amount of detergent for your KitchenAid dishwasher. Avoid using excessive amounts of detergent, as this can leave a residue on the dishes and interfere with the cleaning process.
Additional Tips for Maintaining Your KitchenAid Dishwasher:
- Regularly clean the dishwasher’s interior, including the door gasket, spray arms, and filter.
- Use a rinse aid to help prevent water spots on dishes and glassware.
- Avoid putting non-dishwasher-safe items in the dishwasher.
- Run the dishwasher on a hot water cycle at least once a month to help remove grease and buildup.
- Have your dishwasher serviced by a qualified technician every few years to ensure optimal performance.
Conclusion:
A flashing Clean light on your KitchenAid dishwasher can be a frustrating issue, but it’s often caused by a common problem that can be easily resolved. By following the troubleshooting steps outlined in this guide, you can identify and address the underlying cause of the issue and restore your dishwasher to its normal operation. Remember to practice regular maintenance and care to keep your KitchenAid dishwasher running smoothly for years to come.