What To Know
- A kinked or damaged water supply hose can restrict the flow of water, causing the dishwasher to display the E19 error.
- Locate the water inlet filter, which is typically found at the connection point between the water supply hose and the dishwasher.
- To test the water inlet valve, disconnect the water supply hose from the dishwasher and place a bucket underneath the hose.
Bosch dishwashers are renowned for their efficiency and reliability. However, like any appliance, they may occasionally encounter issues that require troubleshooting and resolution. One such issue is the E19 error code, which can be a source of frustration for users. This blog post will provide a comprehensive guide to understanding the E19 error code, identifying its potential causes, and outlining effective steps to reset your Bosch dishwasher and resolve the problem.
Common Causes of the E19 Error Code
The E19 error code in Bosch dishwashers typically indicates a problem with the appliance’s water supply. Here are some common causes of this error:
1. Clogged Water Inlet Hose: A clogged water inlet hose can restrict the flow of water into the dishwasher, triggering the E19 error.
2. Faulty Water Inlet Valve: A malfunctioning water inlet valve may fail to open properly, preventing water from entering the dishwasher.
3. Kinked or Damaged Water Supply Hose: A kinked or damaged water supply hose can restrict the flow of water, causing the dishwasher to display the E19 error.
4. Low Water Pressure: Insufficient water pressure can also lead to the E19 error. This can occur due to issues with the home’s water supply or a faulty water pressure regulator.
Steps to Reset Your Bosch Dishwasher and Resolve the E19 Error
1. Turn Off the Dishwasher: Begin by turning off the dishwasher’s power supply. This can be done by unplugging the appliance or turning off the circuit breaker that supplies power to it.
2. Check the Water Supply: Inspect the water supply hose for any kinks or damage. If the hose is kinked, straighten it out. If the hose is damaged, replace it with a new one.
3. Clean the Water Inlet Filter: Locate the water inlet filter, which is typically found at the connection point between the water supply hose and the dishwasher. Remove the filter and clean it thoroughly under running water.
4. Test the Water Inlet Valve: To test the water inlet valve, disconnect the water supply hose from the dishwasher and place a bucket underneath the hose. Turn on the water supply and check if water flows out of the hose. If water does not flow, the water inlet valve may be faulty and needs to be replaced.
5. Check the Water Pressure: Ensure that the water pressure to your home is adequate. You can do this by attaching a pressure gauge to an outdoor faucet and measuring the water pressure. If the pressure is below the recommended level, contact your water supplier to resolve the issue.
6. Reset the Dishwasher: Once you have addressed the potential causes of the E19 error, reset the dishwasher by pressing and holding the “Start” button for approximately 3 seconds. The dishwasher should then start operating normally.
Preventive Measures to Avoid the E19 Error Code
To minimize the chances of encountering the E19 error code in the future, consider the following preventive measures:
1. Regularly Clean the Dishwasher: Keep your dishwasher clean and free of food residue and debris. This will help prevent clogs in the water inlet hose and filter.
2. Inspect the Water Supply Hose Periodically: Check the water supply hose for any signs of wear or damage. Replace the hose if necessary.
3. Ensure Adequate Water Pressure: Make sure that the water pressure to your home is sufficient for the proper operation of your dishwasher.
Conclusion: Regaining Optimal Dishwasher Performance
By following the steps outlined in this guide, you can effectively reset your Bosch dishwasher and resolve the E19 error code. By addressing the underlying causes of the error and implementing preventive measures, you can ensure optimal dishwasher performance and avoid future issues. Remember, regular maintenance and proper usage are key to keeping your Bosch dishwasher operating smoothly and efficiently.
