What To Know
- In this comprehensive guide, we’ll walk you through the steps of how to replace a Whirlpool microwave control board.
- Open the microwave door and locate the two screws at the top of the door frame.
- Align the new control board with the bracket and secure it using the screws or bolts you removed earlier.
Is your Whirlpool microwave leaving you in the dark, literally? A faulty control board could be the culprit. Don’t fret! Replacing it is a straightforward task that can restore your microwave to its former glory. In this comprehensive guide, we’ll walk you through the steps of how to replace a Whirlpool microwave control board.
Tools and Materials You’ll Need
Before you begin, gather the following tools and materials:
- New Whirlpool microwave control board
- Screwdriver (Phillips head and flathead)
- Nut driver or socket wrench
- Multimeter (optional)
Safety Precautions
Before starting any work, unplug the microwave from the power outlet for safety.
Step 1: Remove the Microwave Door
Open the microwave door and locate the two screws at the top of the door frame. Remove these screws and carefully lift the door off its hinges. Set the door aside in a safe place.
Step 2: Remove the Control Panel
Locate the screws around the perimeter of the control panel. Remove these screws and gently pull the control panel away from the microwave. Disconnect the wires connecting the control panel to the microwave.
Step 3: Remove the Old Control Board
Inside the microwave, you’ll see the control board mounted to a metal bracket. Locate the screws or bolts holding the control board in place and remove them. Carefully lift the control board off the bracket and disconnect any remaining wires.
Step 4: Install the New Control Board
Align the new control board with the bracket and secure it using the screws or bolts you removed earlier. Reconnect all the wires to the new control board.
Step 5: Reinstall the Control Panel
Place the control panel back into the microwave and reconnect the wires. Secure the control panel with the screws you removed earlier.
Step 6: Reattach the Microwave Door
Lift the microwave door and align it with the hinges. Secure the door with the two screws you removed at the beginning.
Step 7: Test the Microwave
Plug the microwave back into the power outlet and turn it on. Check if the control board is functioning properly by operating the microwave’s various functions.
Troubleshooting Tips
If you encounter any issues during the replacement process, try these troubleshooting tips:
- Ensure that all wires are securely connected.
- Check if the new control board is compatible with your microwave model.
- Use a multimeter to test the continuity of the wires.
Wrap-Up: Microwave Magic Restored
Congratulations! You’ve successfully replaced the Whirlpool microwave control board. With a little patience and these step-by-step instructions, you’ve breathed new life into your microwave. Enjoy the convenience of a fully functional appliance once again.
Common Questions and Answers
1. Can I replace the control board myself?
Yes, replacing the control board is a relatively straightforward task that can be completed by most DIYers with basic tools.
2. How do I know if the control board is faulty?
Symptoms of a faulty control board include unresponsive buttons, erratic operation, or a completely non-functional microwave.
3. Where can I find a replacement control board?
Replacement control boards can be purchased from appliance parts suppliers or online retailers.
4. Is it necessary to replace the entire control board?
In most cases, yes. Replacing the entire control board is the most reliable and cost-effective solution.
5. How long does it take to replace a control board?
The replacement process typically takes around 30-60 minutes, depending on your skill level.
