Tired Of Leaky Dishwashers? Here’s How To Replace Your Kenmore Dishwasher Pump In 5 Simple Steps
What To Know
- If your Kenmore dishwasher’s pump is malfunctioning, it can lead to a variety of problems, including dishes that are not cleaned properly, water leaks, and even damage to the dishwasher itself.
- In this comprehensive guide, we will walk you through the steps involved in replacing the pump, from gathering the necessary tools and materials to testing the new pump.
- Once the new pump is installed, you can test it by turning on the water supply and the power to the dishwasher.
A properly functioning dishwasher pump is essential for ensuring that your dishes are cleaned effectively and efficiently. If your Kenmore dishwasher‘s pump is malfunctioning, it can lead to a variety of problems, including dishes that are not cleaned properly, water leaks, and even damage to the dishwasher itself.
Replacing a Kenmore dishwasher pump is not a difficult task, but it does require some basic tools and knowledge. In this comprehensive guide, we will walk you through the steps involved in replacing the pump, from gathering the necessary tools and materials to testing the new pump.
Tools and Materials
Before you begin the repair, gather the following tools and materials:
- Replacement Kenmore dishwasher pump
- Screwdriver
- Pliers
- Adjustable wrench
- Bucket
- Towels
- Flashlight
- Safety glasses
Step-by-Step Guide
1. Turn Off the Water Supply
The first step is to turn off the water supply to your dishwasher. This is typically done by closing the valve located under the sink. If there is no valve, you will need to turn off the main water supply to your home.
2. Disconnect the Power
Once the water supply is turned off, you need to disconnect the power to the dishwasher. This is done by unplugging the dishwasher from the electrical outlet. If the dishwasher is hardwired, you will need to turn off the circuit breaker that powers it.
3. Remove the Dishwasher Door
To access the pump, you will need to remove the dishwasher door. This is typically done by removing the screws that hold the door in place. Once the screws are removed, the door can be lifted off.
4. Locate the Pump
The pump is typically located at the bottom of the dishwasher, near the back. It is usually a round or cylindrical object with a motor attached to it.
5. Disconnect the Pump
Once you have located the pump, you need to disconnect it from the dishwasher. This is done by disconnecting the wires that are connected to the motor. You may also need to remove some screws or bolts that hold the pump in place.
6. Remove the Pump
Once the pump is disconnected, you can remove it from the dishwasher. Be careful not to spill any water that may be inside the pump.
7. Install the New Pump
To install the new pump, simply reverse the steps that you took to remove the old pump. Be sure to connect the wires correctly and tighten all of the screws or bolts.
8. Test the New Pump
Once the new pump is installed, you can test it by turning on the water supply and the power to the dishwasher. Run the dishwasher through a cycle to make sure that the pump is working properly.
Troubleshooting
If you are having problems replacing the pump, here are a few things that you can check:
- Make sure that the new pump is the correct model for your dishwasher.
- Check the wiring to make sure that it is connected correctly.
- Tighten all of the screws and bolts that hold the pump in place.
- If the pump is still not working, you may need to call a qualified appliance repair technician.
Conclusion: Restoring Your Dishwasher’s Performance
By following the steps outlined in this guide, you can successfully replace the pump in your Kenmore dishwasher and restore its performance. With a new pump, your dishwasher will be able to clean your dishes effectively and efficiently, leaving them sparkling clean.
