What To Know
- Replacing a GE microwave handle is a relatively simple task that can be completed in a matter of minutes.
- With the right tools and a little bit of know-how, you can save yourself the cost of calling a repairman.
- The cost of a new GE microwave handle will vary depending on the model of your microwave.
Replacing a GE microwave handle is a relatively simple task that can be completed in a matter of minutes. With the right tools and a little bit of know-how, you can save yourself the cost of calling a repairman.
Tools and Materials You’ll Need
- Phillips head screwdriver
- New GE microwave handle
- Measuring tape or ruler (optional)
Safety First
Before you begin, make sure to unplug the microwave from the power outlet. This will prevent any electrical accidents from occurring.
Step 1: Remove the Old Handle
Using the Phillips head screwdriver, remove the two screws that are holding the old handle in place. Be careful not to lose the screws.
Step 2: Disconnect the Wires
Once the screws are removed, gently pull the handle away from the microwave. You will see two wires connected to the back of the handle. Disconnect the wires by pressing down on the tabs on the connectors.
Step 3: Measure and Align the New Handle
Take the new handle and measure the distance between the mounting holes. Use a measuring tape or ruler to ensure that the new handle will be aligned properly.
Step 4: Connect the Wires
Connect the wires to the back of the new handle. Make sure that the wires are securely connected by pressing down on the tabs on the connectors.
Step 5: Mount the New Handle
Align the new handle with the mounting holes on the microwave. Push the handle into place until it snaps into position.
Step 6: Tighten the Screws
Insert the screws into the mounting holes and tighten them using the Phillips head screwdriver. Do not overtighten the screws.
Step 7: Plug in the Microwave
Plug the microwave back into the power outlet. Test the new handle to make sure that it is working properly.
Troubleshooting
If you are having trouble replacing the GE microwave handle, try the following troubleshooting tips:
- Make sure that you are using the correct type of handle. There are different types of GE microwave handles, so it is important to make sure that you are using the correct one for your model.
- Check the wires. Make sure that the wires are securely connected to the back of the handle. If the wires are not connected properly, the handle will not work.
- Tighten the screws. If the screws are not tight enough, the handle will not be secure. Tighten the screws using a Phillips head screwdriver.
Top Questions Asked
Q: How do I know if my GE microwave handle needs to be replaced?
A: If your GE microwave handle is broken, loose, or difficult to operate, it may need to be replaced.
Q: How much does it cost to replace a GE microwave handle?
A: The cost of a new GE microwave handle will vary depending on the model of your microwave. However, you can expect to pay between $10 and $30 for a new handle.
Q: Can I replace the GE microwave handle myself?
A: Yes, you can replace the GE microwave handle yourself. It is a relatively simple task that can be completed in a matter of minutes.
