What To Know
- Replacing the control board in your Frigidaire oven is a relatively straightforward task that can be completed in a few hours.
- Use a flathead screwdriver to gently pry the control board loose from the control panel.
- If the oven does not turn on after replacing the control board, check the electrical connections to make sure they are secure.
Replacing the control board in your Frigidaire oven is a relatively straightforward task that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a professional appliance repair technician.
Materials You’ll Need:
- New Frigidaire oven control board
- Phillips screwdriver
- Flathead screwdriver
- Electrical tape
- Wire strippers (optional)
Safety Precautions:
- Unplug the oven from the power outlet.
- Allow the oven to cool completely.
- Wear safety glasses and gloves to protect yourself from electrical shock and sharp edges.
Step 1: Remove the Oven Door
- Open the oven door fully.
- Locate the two screws on the top of the door hinge.
- Remove the screws and carefully lift the door off the hinges.
Step 2: Access the Control Panel
- Use a Phillips screwdriver to remove the screws holding the control panel in place.
- Gently pull the control panel forward to disconnect the electrical connectors.
Step 3: Disconnect the Control Board
- Locate the control board, which is typically mounted on the back of the control panel.
- Unplug the wires from the control board by pressing down on the tabs and pulling them straight out.
- If the wires are held in place by screws, use a Phillips screwdriver to remove them.
Step 4: Remove the Control Board
- Use a flathead screwdriver to gently pry the control board loose from the control panel.
- Be careful not to damage the delicate components on the board.
Step 5: Install the New Control Board
- Place the new control board into the control panel and align it correctly.
- Press down on the control board until it snaps into place.
Step 6: Reconnect the Wires
- Plug the wires back into the control board, ensuring they are securely connected.
- If you used wire strippers, make sure to twist the exposed wires together and wrap them with electrical tape for a strong connection.
Step 7: Reassemble the Oven
- Reattach the control panel to the oven and secure it with screws.
- Replace the oven door and tighten the hinge screws.
- Plug the oven back into the power outlet and test it to ensure it is working properly.
Tips for Troubleshooting:
- If the oven does not turn on after replacing the control board, check the electrical connections to make sure they are secure.
- If the oven displays an error code, refer to the user manual for troubleshooting instructions.
- If you encounter any difficulties during the repair, do not hesitate to contact a qualified appliance repair technician for assistance.
Frequently Asked Questions:
Q: How often should I replace the control board in my Frigidaire oven?
A: The lifespan of an oven control board varies depending on usage and maintenance. However, it is generally recommended to replace the control board every 5-10 years.
Q: Can I use a control board from another oven model?
A: No, it is important to use a control board that is specifically designed for your Frigidaire oven model. Using an incompatible control board can cause damage to the oven.
Q: What are the signs that my oven control board needs to be replaced?
A: Common signs include the oven not turning on, inconsistent temperature regulation, or error codes displayed on the control panel.
