What To Know
- Replacing a faulty turntable motor in your Frigidaire microwave is a relatively simple task that can be completed in under an hour.
- Connect the wires to the motor terminals, matching the colors to the original connections.
- Replacing the turntable motor in your Frigidaire microwave is a straightforward process that can be completed in a few simple steps.
Replacing a faulty turntable motor in your Frigidaire microwave is a relatively simple task that can be completed in under an hour. Follow these step-by-step instructions to restore your microwave to full functionality.
Tools and Materials Required
- Screwdriver (Phillips and flathead)
- New turntable motor
- Socket wrench (optional)
Safety Precautions
- Unplug the microwave from the power outlet before starting any work.
- Allow the microwave to cool completely before handling any internal components.
- Wear gloves to protect your hands from sharp edges.
Step-by-Step Instructions
#1. Remove the Back Cover
- Use a Phillips screwdriver to remove the screws holding the back cover in place.
- Carefully lift off the back cover.
#2. Locate the Turntable Motor
- The turntable motor is usually located in the center of the microwave cavity.
- It is a small, cylindrical device with wires attached to it.
#3. Disconnect the Wires
- Use a flathead screwdriver to gently pry the wire connectors off the motor terminals.
- Note the position of each wire before disconnecting it.
#4. Remove the Mounting Screws
- Use a Phillips screwdriver to remove the screws holding the motor in place.
- Carefully lift out the motor.
#5. Install the New Motor
- Align the new motor with the mounting holes.
- Secure it with the screws you removed earlier.
#6. Reconnect the Wires
- Connect the wires to the motor terminals, matching the colors to the original connections.
- Push the wire connectors firmly into place.
#7. Reattach the Back Cover
- Carefully place the back cover back onto the microwave.
- Secure it with the screws you removed earlier.
#8. Test the Microwave
- Plug the microwave back into the power outlet.
- Place a glass of water in the center of the turntable.
- Start the microwave and observe if the turntable rotates smoothly.
Troubleshooting
- If the turntable does not rotate, check the wire connections and ensure they are secure.
- If the motor makes a loud noise, it may be faulty and need to be replaced.
- If you encounter any difficulties, consult a qualified appliance repair technician.
Conclusion
Replacing the turntable motor in your Frigidaire microwave is a straightforward process that can be completed in a few simple steps. By following these instructions, you can restore your microwave to full functionality and enjoy the convenience of a rotating turntable once again.
FAQ
#1. What are the symptoms of a faulty turntable motor?
- Turntable does not rotate
- Turntable rotates slowly or erratically
- Microwave makes a loud noise when the turntable rotates
#2. How often should I replace the turntable motor?
- Turntable motors typically last for several years, but their lifespan can vary depending on usage and maintenance.
- If you notice any of the symptoms listed above, it may be time to replace the motor.
#3. Can I use a motor from a different microwave brand?
- It is not recommended to use a motor from a different microwave brand, as they may not be compatible with your Frigidaire microwave.
- Always use a genuine Frigidaire replacement part for optimal performance and safety.
