What To Know
- Use the adjustable wrench to loosen the clamp that secures the drain hose to the drain pump.
- If the hose is clogged, you can try to clean it with a snake or a wire hanger.
A clogged dishwasher drain hose can lead to a variety of problems, including water leaks, unpleasant odors, and dishes that don’t get clean. If you’re experiencing any of these issues, it’s time to replace the drain hose. This guide will walk you through the steps of replacing an Asko dishwasher drain hose, so you can get your dishwasher back up and running in no time.
Tools and Materials Needed
Before you begin, gather the following tools and materials:
- New Asko dishwasher drain hose
- Adjustable wrench
- Pliers
- Screwdriver
- Bucket
- Rags
- Flashlight
Step-by-Step Guide
1. Turn Off the Water Supply.
Before you start working on the dishwasher, turn off the water supply to the unit. This will help prevent flooding and damage to your home.
2. Disconnect the Dishwasher.
Disconnect the dishwasher from the power supply and the water supply. Then, move the dishwasher away from the wall so you have enough room to work.
3. Locate the Drain Hose.
The drain hose is typically located at the back of the dishwasher, near the bottom. It is usually a black or gray hose that is connected to the drain pump.
4. Disconnect the Drain Hose.
Use the adjustable wrench to loosen the clamp that secures the drain hose to the drain pump. Once the clamp is loose, you can pull the hose off of the pump.
5. Clean the Drain Hose.
Inspect the drain hose for clogs or damage. If the hose is clogged, you can try to clean it with a snake or a wire hanger. If the hose is damaged, you will need to replace it.
6. Install the New Drain Hose.
Attach the new drain hose to the drain pump. Make sure that the hose is securely fastened and that there are no leaks.
7. Reconnect the Dishwasher.
Reconnect the dishwasher to the water supply and the power supply. Then, move the dishwasher back into place.
8. Test the Dishwasher.
Run the dishwasher through a cycle to make sure that it is working properly. Check for leaks and make sure that the dishes are getting clean.
Troubleshooting
If you are having trouble replacing the drain hose, here are a few troubleshooting tips:
- Make sure that you have the right size drain hose. The hose should be the same diameter as the old hose.
- If the hose is clogged, you can try to clean it with a snake or a wire hanger.
- If the hose is damaged, you will need to replace it.
- If you are still having trouble, you may need to call a qualified appliance repair technician.
Conclusion
Replacing an Asko dishwasher drain hose is a relatively simple task that can be completed in about an hour. By following the steps in this guide, you can save yourself the cost of calling a repair technician.
