What To Know
- Press the release button on the side of the drum and tilt it forward to detach it from the base.
- Insert the auger into the drum and turn it clockwise to lock it in place.
- If the auger is stuck, apply a small amount of vegetable oil to the shaft and try again.
Are you ready to embark on the journey of removing your Kuving’s juicer? Whether you’re experiencing a malfunction or simply need to clean it thoroughly, this comprehensive guide will provide you with the step-by-step instructions you need.
Step 1: Safety First
Before you begin, ensure your safety by unplugging the juicer from the power outlet. Allow it to cool down completely if it has been recently used.
Step 2: Disassembling the Hopper and Feed Chute
Start by removing the hopper and feed chute. Gently lift the hopper straight up and away from the juicer base. Next, press the release button on the feed chute and pull it upwards to detach it.
Step 3: Removing the Auger
Next, it’s time to remove the auger. Grip the auger handle and turn it counterclockwise while pulling it upwards. It should come out easily.
Step 4: Detaching the Drum and Screen
Locate the drum and screen assembly. Press the release button on the side of the drum and tilt it forward to detach it from the base. Carefully pull the drum away from the screen.
Step 5: Removing the Pulp Container
Lift the pulp container straight up and off the base. Ensure that it is empty before reassembling the juicer.
Step 6: Cleaning the Components
With all the components removed, it’s time to clean them thoroughly. Use a soft cloth and warm, soapy water to wipe down all surfaces. Rinse them with clean water and allow them to dry completely.
Step 7: Reassembling the Juicer
Once the components are clean and dry, it’s time to reassemble the juicer. Follow the steps in reverse order:
1. Place the pulp container back on the base.
2. Attach the drum and screen assembly to the base.
3. Insert the auger into the drum and turn it clockwise to lock it in place.
4. Reattach the feed chute and hopper.
Problem-Solving Tips
Auger Stuck:
If the auger is stuck, apply a small amount of vegetable oil to the shaft and try again.
Drum Not Aligning:
Ensure that the drum is properly aligned with the base before locking it in place.
Juicer Vibrating:
Check that all components are securely tightened and that the juicer is placed on a stable surface.
Leaking:
Inspect the O-rings for any damage or wear. Replace them if necessary.
Recommendations: A Job Well Done
Congratulations! You have successfully removed and reassembled your Kuving’s juicer. With proper care and maintenance, your juicer will provide you with years of healthy and delicious juice.
What You Need to Know
How often should I remove and clean my Kuving’s juicer?
It is recommended to remove and clean your juicer after every use.
Can I use a dishwasher to clean the components?
No, it is not recommended to use a dishwasher as it can damage the components.
Where can I purchase replacement parts for my juicer?
Replacement parts can be purchased from the manufacturer’s website or authorized retailers.
