What To Know
- Once the heating element is installed, reconnect the wires to the heating element.
- If you’re not comfortable working on appliances, you can call a qualified appliance repair technician to remove the heating element for you.
- Removing the heating element from an Amana dishwasher is a relatively simple task that can be completed in about 30 minutes.
Amana dishwashers are known for their reliability and efficiency, but like all appliances, they can experience problems from time to time. One common issue is a faulty heating element, which can prevent the dishwasher from cleaning dishes properly. If you’re experiencing this problem, you may be wondering how to remove the heating element from your Amana dishwasher.
Tools and Materials
Before you begin, you’ll need to gather the following tools and materials:
- A Phillips head screwdriver
- A flat head screwdriver
- A pair of pliers
- A bucket
- A towel
- A new heating element (if necessary)
Step-by-Step Instructions
1. Turn off the power and water supply to the dishwasher. This is important to prevent any electrical shocks or water damage.
2. Remove the lower access panel. The lower access panel is usually located at the bottom of the dishwasher door. Use the Phillips head screwdriver to remove the screws that hold the panel in place.
3. Locate the heating element. The heating element is usually located at the bottom of the dishwasher tub. It’s a round, metal object with a wire coil inside.
4. Disconnect the wires from the heating element. Use the pliers to carefully disconnect the wires from the heating element. Be careful not to damage the wires.
5. Remove the heating element. Once the wires are disconnected, you can remove the heating element from the dishwasher tub. Use the flat head screwdriver to pry the heating element loose.
6. Clean the heating element. If the heating element is dirty or clogged, you can clean it with a mild detergent and water. Rinse the heating element thoroughly and dry it with a towel.
7. Install the new heating element (if necessary). If the heating element is damaged, you will need to replace it with a new one. To install the new heating element, simply reverse the steps above.
8. Reconnect the wires to the heating element. Once the heating element is installed, reconnect the wires to the heating element. Be sure to connect the wires correctly.
9. Replace the lower access panel. Once the wires are connected, replace the lower access panel. Use the Phillips head screwdriver to replace the screws that hold the panel in place.
10. Turn on the power and water supply to the dishwasher. Once the lower access panel is replaced, you can turn on the power and water supply to the dishwasher. Test the dishwasher to make sure that the heating element is working properly.
Tips
- If you’re not comfortable working on appliances, you can call a qualified appliance repair technician to remove the heating element for you.
- Be careful not to damage the wires when you’re disconnecting them from the heating element.
- If the heating element is damaged, you will need to replace it with a new one. You can find a new heating element at a local appliance parts store or online.
- Once you’ve replaced the heating element, test the dishwasher to make sure that it’s working properly.
Troubleshooting
If you’re having trouble removing the heating element from your Amana dishwasher, here are a few troubleshooting tips:
- Make sure that you have the right tools and materials.
- Follow the instructions carefully.
- If you’re still having trouble, you can call a qualified appliance repair technician for help.
Conclusion
Removing the heating element from an Amana dishwasher is a relatively simple task that can be completed in about 30 minutes. By following the steps in this guide, you can save yourself the cost of calling a repair technician.
