What To Know
- The size of staples that you should use in your hammer tacker will depend on the thickness of the material you are tacking.
- If your hammer tacker is not working properly, you can try troubleshooting the problem by following the steps outlined in the “Troubleshooting Common Problems” section of this blog post.
- If you are still unable to fix the problem, you may need to take the tacker to a qualified repair technician.
A hammer tacker is an essential tool for any home, office, or workshop. It’s a versatile tool that can be used for a variety of tasks, from hanging posters and pictures to tacking down carpet and upholstery. However, if you’re not familiar with how to reload a hammer tacker, it can be a frustrating experience.
In this blog post, we’ll provide you with a step-by-step guide on how to reload a hammer tacker. We’ll also cover some common problems that you may encounter when reloading your tacker, and how to troubleshoot them.
Step-by-Step Guide to Reloading a Hammer Tacker
1. Gather Your Supplies
Before you begin, you’ll need to gather the following supplies:
- A hammer tacker
- A pack of staples
- A pair of pliers (optional)
2. Open the Tacker
To open the tacker, locate the release lever on the back of the tool. Squeeze the lever and pull the top of the tacker up.
3. Remove the Old Staples
If there are any old staples in the tacker, remove them using a pair of pliers.
4. Load the New Staples
Take a handful of staples and insert them into the magazine of the tacker. Make sure that the staples are facing the correct direction.
5. Close the Tacker
Once the staples are loaded, close the tacker by pressing down on the top of the tool.
6. Test the Tacker
To test the tacker, fire a few staples into a piece of scrap wood. Make sure that the staples are being driven in properly.
Troubleshooting Common Problems
1. The Tacker Won’t Fire
If the tacker won‘t fire, there are a few things you can check:
- Make sure that the staples are facing the correct direction.
- Make sure that the staples are not jammed in the magazine.
- Make sure that the firing mechanism is not blocked.
2. The Staples Are Not Being Driven In Properly
If the staples are not being driven in properly, there are a few things you can check:
- Make sure that the tacker is not set to the wrong power setting.
- Make sure that the staples are the correct size for the tacker.
- Make sure that the material you are tacking is not too thick or too hard.
3. The Tacker Is Leaking Oil
If the tacker is leaking oil, it is likely that the seals have failed. You will need to take the tacker to a qualified repair technician to have it repaired.
Final Thoughts: Reloading Your Hammer Tacker Like a Pro
Reloading a hammer tacker is a simple task that can be mastered with a little practice. By following the steps outlined in this blog post, you can ensure that your tacker is always ready to use.
Basics You Wanted To Know
1. What size staples should I use in my hammer tacker?
The size of staples that you should use in your hammer tacker will depend on the thickness of the material you are tacking. For most general-purpose applications, a staple size of 1/4 inch is a good choice.
2. How often should I oil my hammer tacker?
You should oil your hammer tacker every few months, or more often if you use it frequently. To oil your tacker, apply a few drops of oil to the moving parts.
3. What should I do if my hammer tacker is not working properly?
If your hammer tacker is not working properly, you can try troubleshooting the problem by following the steps outlined in the “Troubleshooting Common Problems” section of this blog post. If you are still unable to fix the problem, you may need to take the tacker to a qualified repair technician.
