What To Know
- Leveling your Thermador dishwasher is a relatively simple task that can be completed in a few minutes with the right tools and knowledge.
- – Use the level to check the dishwasher is level from front to back and side to side.
- – Once the dishwasher is level, tighten the locknuts on the leveling legs.
A properly leveled Thermador dishwasher is essential for optimal performance and longevity. A dishwasher that is not level may cause dishes to come out dirty, make loud noises, or even leak water. Leveling your Thermador dishwasher is a relatively simple task that can be completed in a few minutes with the right tools and knowledge.
Tools and Materials
Before you begin, gather the following tools and materials:
- A level
- A screwdriver
- A pair of pliers
- A flashlight
- A towel
Step-by-Step Instructions
1. Turn Off the Water Supply:
– Locate the water supply valve for your dishwasher. It is typically located under the sink or behind the dishwasher.
– Turn the valve clockwise to turn off the water supply.
2. Open the Dishwasher Door:
– Open the dishwasher door to access the inside of the appliance.
3. Locate the Leveling Legs:
– There are typically four leveling legs located at the bottom corners of the dishwasher.
– The leveling legs are usually made of plastic or metal and have a threaded shaft.
4. Adjust the Leveling Legs:
– Use the pliers to loosen the locknuts on the leveling legs.
– Turn the leveling legs clockwise to raise the dishwasher or counterclockwise to lower it.
– Use the level to check the dishwasher is level from front to back and side to side.
– Once the dishwasher is level, tighten the locknuts on the leveling legs.
5. Reattach the Dishwasher Door:
– Close the dishwasher door and check that it closes properly.
6. Turn On the Water Supply:
– Turn the water supply valve counterclockwise to turn on the water supply.
7. Run a Test Cycle:
– Run a short test cycle to ensure the dishwasher is working properly.
Troubleshooting Tips
If you are having trouble leveling your Thermador dishwasher, here are a few troubleshooting tips:
- Make sure the floor is level. If the floor is not level, it will be difficult to level the dishwasher.
- Check the leveling legs for damage. If the leveling legs are damaged, they may not be able to support the weight of the dishwasher.
- Make sure the locknuts on the leveling legs are tight. If the locknuts are not tight, the leveling legs may come loose and the dishwasher may become unlevel.
- If you are still having trouble leveling the dishwasher, you may need to call a qualified appliance repair technician for assistance.
Conclusion: Ensuring Optimal Dishwasher Performance
Leveling your Thermador dishwasher is a crucial step in ensuring optimal performance and longevity. By following the steps outlined in this guide, you can easily level your dishwasher and enjoy clean, dry dishes every time. Remember, a properly leveled dishwasher is a happy dishwasher!
