Unlock The Secret To Effortless Dishwashing: How To Level Asko Dishwasher For Optimal Performance

Asko dishwashers are renowned for their superior cleaning performance and energy efficiency. However, to ensure that your Asko dishwasher continues to operate at its best, it is essential to level it correctly. A properly leveled dishwasher will not only clean your dishes more effectively but also prevent potential problems such as leaks, noise, and vibrations. In this comprehensive guide, we will provide you with a step-by-step process on how to level an Asko dishwasher, ensuring optimal performance and longevity.

Step 1: Gather the Necessary Tools

Before you begin the leveling process, ensure you have the following tools:

• Adjustable wrench
• Level
• Screwdriver
• Tape measure
• Shims (optional)

Step 2: Turn Off the Water and Power Supply

To ensure safety, turn off the water supply to the dishwasher and disconnect the power cord from the outlet. If your dishwasher is hardwired, turn off the circuit breaker or fuse that controls it.

Step 3: Open the Dishwasher Door

Open the door of the dishwasher to gain access to the leveling feet.

Step 4: Locate the Leveling Feet

Asko dishwashers typically have four leveling feet located at each corner of the appliance. These feet are usually adjustable, allowing you to raise or lower the dishwasher to achieve a level position.

Step 5: Measure the Height of the Dishwasher

Using a tape measure, measure the height of the dishwasher from the floor to the top of the door. Make a note of this measurement.

Step 6: Place the Level on Top of the Dishwasher

Place the level on top of the dishwasher, ensuring it is parallel to the front edge. Check if the bubble in the level is centered. If the bubble is not centered, the dishwasher is not level.

Step 7: Adjust the Leveling Feet

If the dishwasher is not level, adjust the leveling feet accordingly. To raise the dishwasher, turn the leveling foot clockwise. To lower the dishwasher, turn the leveling foot counterclockwise.

Step 8: Recheck the Level

Once you have adjusted the leveling feet, recheck the level to ensure the dishwasher is now level. If necessary, make further adjustments until the bubble in the level is centered.

Step 9: Secure the Leveling Feet (Optional)

Some Asko dishwashers have a locking mechanism for the leveling feet. If your dishwasher has this feature, engage the locking mechanism to secure the leveling feet in place.

Step 10: Test the Dishwasher

Once the dishwasher is leveled, turn on the water supply and power supply. Run a test cycle to ensure the dishwasher is operating properly. Check for any leaks, unusual noises, or vibrations. If you encounter any problems, recheck the leveling and make necessary adjustments.

Conclusion: Ensuring Optimal Dishwasher Performance

Leveling your Asko dishwasher is a crucial step in ensuring its optimal performance and longevity. By following the steps outlined in this guide, you can easily level your dishwasher and enjoy a sparkling clean dishwashing experience. Remember, a properly leveled dishwasher not only cleans your dishes more effectively but also prevents potential problems that can arise from an unlevel appliance.