What To Know
- – If the hose is clogged, you can try to clear it using a drain snake or a wet/dry vacuum.
- – The air gap is a small opening located at the top of the sink where the dishwasher drain hose connects.
- – Pour the drain cleaner into the dishwasher and let it sit for the amount of time specified on the product label.
KitchenAid dishwashers are known for their reliability and efficiency, but even the best appliances can experience occasional problems. One common issue is a clogged or slow-draining dishwasher. If you’re facing this problem, don’t worry—you can usually fix it yourself with a little troubleshooting and some simple tools.
Step-by-Step Guide to Unclogging and Draining Your KitchenAid Dishwasher
1. Check the Drain Hose:
– Inspect the drain hose for kinks or clogs.
– If the hose is kinked, straighten it out.
– If the hose is clogged, you can try to clear it using a drain snake or a wet/dry vacuum.
2. Clean the Drain Filter:
– Locate the drain filter, which is usually at the bottom of the dishwasher.
– Remove the filter and clean it thoroughly with hot water and dish soap.
– Make sure to remove any food particles or debris that may be clogging the filter.
3. Check the Air Gap:
– The air gap is a small opening located at the top of the sink where the dishwasher drain hose connects.
– Make sure the air gap is clear and not blocked by anything.
– If the air gap is clogged, clean it with a toothpick or a small brush.
4. Reset the Dishwasher:
– Sometimes, a simple reset can solve the problem.
– To reset the dishwasher, turn it off and unplug it for a few minutes.
– Then, plug it back in and turn it on.
5. Use a Drain Cleaner:
– If the above steps don‘t work, you can try using a drain cleaner.
– Pour the drain cleaner into the dishwasher and let it sit for the amount of time specified on the product label.
– Then, run the dishwasher through a cycle to flush out the drain cleaner.
6. Call a Professional:
– If you’ve tried all of the above steps and your dishwasher is still not draining properly, it’s time to call a professional appliance repair technician.
Preventive Measures to Keep Your KitchenAid Dishwasher Draining Properly
1. Regularly Clean the Drain Filter:
– Make it a habit to clean the drain filter after every few washes.
– This will help prevent food particles and debris from building up and causing clogs.
2. Avoid Putting Large Food Items in the Dishwasher:
– Large food items, such as bones and fruit pits, can easily clog the drain.
– Make sure to scrape off food scraps from dishes before loading them into the dishwasher.
3. Use the Correct Amount of Dishwashing Detergent:
– Using too much dishwashing detergent can cause suds to build up and clog the drain.
– Follow the manufacturer’s instructions for the correct amount of detergent to use.
4. Run the Dishwasher Regularly:
– Even if you don’t have a full load of dishes, it’s a good idea to run the dishwasher at least once a week.
– This will help keep the drain clear and prevent clogs from forming.
Conclusion: Maintaining a Healthy Dishwasher for Optimal Performance
By following these simple steps, you can keep your KitchenAid dishwasher draining properly and ensure that it continues to perform at its best. Regular maintenance and preventive measures will help extend the life of your dishwasher and save you money in the long run. Remember, a well-maintained dishwasher is a happy dishwasher!
