What To Know
- A clogged drain hose is a common culprit behind a dishwasher not draining.
- The air gap is a small device installed on the kitchen sink to prevent dirty water from flowing back into the dishwasher.
- – If you find a clog, use a drain snake or a pair of pliers to remove it.
A dishwasher is a valuable appliance in any modern kitchen, saving time and effort in cleaning dishes. However, when your Whirlpool dishwasher stops draining properly, it can be a frustrating and inconvenient experience. If you’re facing this issue, don’t worry – in this comprehensive guide, we’ll walk you through the potential causes and provide step-by-step instructions on how to fix a Whirlpool dishwasher that’s not draining.
Common Causes of a Whirlpool Dishwasher Not Draining
1. Clogged Drain Hose: A clogged drain hose is a common culprit behind a dishwasher not draining. Food particles, grease, and other debris can accumulate in the hose over time, obstructing the flow of water.
2. Faulty Drain Pump: The drain pump is responsible for pumping water out of the dishwasher. If the drain pump fails or becomes clogged, it can prevent the dishwasher from draining properly.
3. Blocked Air Gap: The air gap is a small device installed on the kitchen sink to prevent dirty water from flowing back into the dishwasher. If the air gap becomes clogged, it can cause draining issues.
4. Kinked Drain Hose: A kinked or bent drain hose can restrict the flow of water, leading to draining problems.
5. Faulty Door Latch: A faulty door latch can prevent the dishwasher from draining properly. If the door latch is damaged or not closing securely, it can cause the dishwasher to stop draining.
How to Fix a Whirlpool Dishwasher Not Draining
1. Check the Drain Hose for Clogs:
– Disconnect the drain hose from the dishwasher and inspect it for clogs.
– Use a flashlight to look for any visible blockages.
– If you find a clog, use a drain snake or a pair of pliers to remove it.
2. Inspect the Drain Pump:
– Locate the drain pump at the bottom of the dishwasher.
– Remove the access panel to expose the drain pump.
– Check the drain pump for clogs or damage.
– If the drain pump is clogged, clean it thoroughly. If it’s damaged, replace it with a new one.
3. Unclog the Air Gap:
– Locate the air gap on the kitchen sink.
– Remove the cover of the air gap.
– Clean the air gap thoroughly to remove any clogs.
4. Straighten the Drain Hose:
– Inspect the drain hose for any kinks or bends.
– If you find a kink, carefully straighten the hose to allow for proper water flow.
5. Check the Door Latch:
– Inspect the door latch to ensure it’s not damaged or loose.
– Tighten the door latch if it’s loose.
– If the door latch is damaged, replace it with a new one.
Additional Tips for Preventing Dishwasher Draining Issues
1. Regularly Clean the Dishwasher Filter: Regularly cleaning the dishwasher filter can prevent clogs and ensure proper draining.
2. Avoid Overloading the Dishwasher: Overloading the dishwasher can put a strain on the drain pump and lead to draining problems.
3. Use the Correct Dishwasher Detergent: Using the wrong detergent can cause sudsing, which can interfere with the draining process.
4. Run the Dishwasher Regularly: Running the dishwasher regularly, even if it’s not fully loaded, can help prevent clogs and keep the dishwasher functioning properly.
Conclusion: Whirlpool Dishwasher Draining Issues Resolved
By following the steps outlined in this guide, you should be able to fix a Whirlpool dishwasher that’s not draining. If you’re still experiencing draining issues after trying these solutions, it’s recommended to contact a qualified appliance repair technician for further assistance.
