Your Maytag Dishwasher Not Draining? Here’s How To Solve This Common Problem At Home

A malfunctioning dishwasher can be a major inconvenience, especially when it comes to draining issues. If your Maytag dishwasher is not draining properly, you may be left with a sink full of dirty dishes and a frustrating mess. Fortunately, there are several troubleshooting steps you can take to identify and resolve the problem. In this comprehensive guide, we’ll walk you through the most common causes of Maytag dishwasher drainage issues and provide step-by-step instructions to help you fix the problem like a pro.

Common Causes of Maytag Dishwasher Not Draining:

1. Clogged Drain Hose: A clogged drain hose is one of the most common reasons why a Maytag dishwasher won‘t drain. Food particles, grease, and other debris can accumulate over time, causing a blockage that prevents water from draining properly.

2. Faulty Drain Pump: The drain pump is responsible for pumping water out of the dishwasher. If the drain pump is faulty or damaged, it may not be able to function properly, resulting in drainage issues.

3. Blocked Air Gap: The air gap is a small device installed on the kitchen sink to prevent dirty water from flowing back into the dishwasher. If the air gap is blocked, it can cause drainage problems.

4. Kinked or Crushed Drain Hose: A kinked or crushed drain hose can restrict the flow of water and prevent the dishwasher from draining properly.

5. Faulty Door Latch: A faulty door latch may not allow the dishwasher to close properly, which can lead to drainage issues.

Step-by-Step Guide to Fix Maytag Dishwasher Not Draining:

1. Check the Drain Hose for Clogs:

• Disconnect the drain hose from the dishwasher and inspect it for any clogs or blockages.
• If you find any debris or food particles, use a plumber’s snake or a wire hanger to clear the clog.
• Reconnect the drain hose and check if the dishwasher is draining properly.

2. Inspect the Drain Pump:

• Access the drain pump by removing the lower access panel of the dishwasher.
• Check the drain pump for any signs of damage or wear.
• If the drain pump is faulty, replace it with a new one.

3. Unblock the Air Gap:

• Locate the air gap on the kitchen sink. It is usually a small, cylindrical device with a small hole on top.
• Unscrew the air gap and clean it thoroughly.
• Reinstall the air gap and check if the dishwasher is draining properly.

4. Check for Kinks or Crushes in the Drain Hose:

• Inspect the entire length of the drain hose for any kinks or crushes.
• If you find any kinks or crushes, straighten the hose or replace it with a new one.

5. Examine the Door Latch:

• Open and close the dishwasher door several times to check the door latch.
• Make sure the door latch engages properly and the door closes securely.
• If the door latch is faulty, replace it with a new one.

Additional Tips:

• Regularly clean the dishwasher filter to prevent clogs.
• Use a dishwasher cleaner to remove grease and grime buildup.
• Avoid overloading the dishwasher with dishes.
• Run the dishwasher through a hot water cycle once a month to keep it clean and functioning properly.

Conclusion:

By following the steps outlined in this guide, you can troubleshoot and fix the drainage issues with your Maytag dishwasher. Remember to always consult your dishwasher’s user manual for specific instructions and safety precautions. If you are uncomfortable performing any of the repairs mentioned above, it is best to call a qualified appliance repair technician for assistance.