Soak up solutions - dishwasher dish out tips
Guide

Unveiling The Secret: How To Effortlessly Fit A Plinth Under Your Integrated Dishwasher

Annie Batho is the founder and editor of Bathebeat. With over 10 years of experience in home appliance repair and maintenance, she loves sharing easy tips and tricks to solve common dishwasher problems. Annie believes dishwashers should work as hard as we do to keep our kitchens clean. When not...

What To Know

  • However, one common challenge that homeowners face during installation is fitting a plinth, or kickboard, underneath the dishwasher to cover the gap between the appliance and the floor.
  • In this comprehensive guide, we’ll walk you through the steps involved in fitting a plinth under your integrated dishwasher, ensuring a perfect fit and a polished finish.
  • If you want to paint or stain the plinth to match your kitchen cabinets or flooring, make sure the surface is clean and free of dust and debris.

Integrated dishwashers are a sleek and modern addition to any kitchen, seamlessly blending into your cabinetry for a cohesive look. However, one common challenge that homeowners face during installation is fitting a plinth, or kickboard, underneath the dishwasher to cover the gap between the appliance and the floor. This seemingly simple task can be tricky, especially if you’re not familiar with the process. In this comprehensive guide, we’ll walk you through the steps involved in fitting a plinth under your integrated dishwasher, ensuring a perfect fit and a polished finish.

Step 1: Gather the Necessary Tools and Materials:

Before you begin, make sure you have the following tools and materials at hand:

  • Measuring tape
  • Pencil or marker
  • Jigsaw or circular saw
  • Drill with drill bits
  • Screwdriver
  • Level
  • Plinth (kickboard)
  • Plinth clips or brackets
  • Screws
  • Wood filler (optional)
  • Paint or stain (optional)

Step 2: Measure and Mark the Plinth:

1. Measure the Space: Using a measuring tape, determine the length of the space under your integrated dishwasher. This will be the length of your plinth.
2. Mark the Plinth: Transfer this measurement to the plinth and mark it with a pencil or marker. Make sure the mark is straight and precise.

Step 3: Cut the Plinth to Size:

1. Set Up Your Saw: If you’re using a jigsaw, attach a fine-toothed blade. If you’re using a circular saw, adjust the blade depth to match the thickness of your plinth.
2. Cut the Plinth: Carefully cut along the marked line, ensuring a clean and straight cut. Wear safety goggles and gloves during this step to protect yourself from splinters and sawdust.

Step 4: Attach the Plinth Clips or Brackets:

1. Choose the Right Clips or Brackets: Plinth clips or brackets are typically included with the plinth. Select the ones that are compatible with your plinth and the type of flooring you have.
2. Position the Clips or Brackets: Place the clips or brackets along the back of the plinth, evenly spaced according to the manufacturer’s instructions. Use a pencil or marker to mark their positions on the plinth.
3. Drill Pilot Holes: Drill pilot holes at the marked positions using a drill bit that is slightly smaller than the diameter of the screws you’ll be using.
4. Attach the Clips or Brackets: Secure the clips or brackets to the plinth using the appropriate screws. Make sure they are firmly attached.

Step 5: Install the Plinth:

1. Position the Plinth: Place the plinth underneath the integrated dishwasher, aligning it with the marked positions on the floor.
2. Secure the Plinth: Use the screws provided with the clips or brackets to secure the plinth to the floor. Make sure the screws are driven in straight and flush with the surface of the plinth.
3. Check the Level: Use a level to ensure that the plinth is perfectly level. If necessary, adjust the screws until the plinth is level.

Step 6: Conceal the Gaps (Optional):

1. Fill the Gaps: If there are any gaps between the plinth and the floor or the dishwasher, you can fill them with wood filler. Apply the wood filler using a putty knife or your finger, making sure to press it firmly into the gaps.
2. Sand the Filler: Once the wood filler has dried, sand it down until it is smooth and flush with the surface of the plinth.

Step 7: Paint or Stain the Plinth (Optional):

1. Prepare the Plinth: If you want to paint or stain the plinth to match your kitchen cabinets or flooring, make sure the surface is clean and free of dust and debris.
2. Apply Paint or Stain: Use a paintbrush or roller to apply paint or stain to the plinth, following the manufacturer’s instructions. Allow the paint or stain to dry completely before moving on.

Kitchen Transformation Complete!

With your plinth seamlessly fitted under the integrated dishwasher, you’ve successfully completed a kitchen makeover that exudes elegance and functionality. The cohesive look of your kitchen will leave you feeling proud of your accomplishment. Now, you can enjoy the convenience of your dishwasher while admiring the polished appearance of your kitchen.

Remember:

  • Always measure and mark accurately to ensure a precise fit.
  • Use the appropriate tools and materials for a secure and durable installation.
  • If you’re unsure about any step, consult a professional for guidance.

Annie Batho

Annie Batho is the founder and editor of Bathebeat. With over 10 years of experience in home appliance repair and maintenance, she loves sharing easy tips and tricks to solve common dishwasher problems. Annie believes dishwashers should work as hard as we do to keep our kitchens clean. When not writing, she enjoys long soaks with a good book.
Back to top button