What To Know
- If you have a Whirlpool dishwasher, here’s a step-by-step guide on how to fill the rinse aid dispenser.
- The rinse aid dispenser in a Whirlpool dishwasher is typically located on the inside of the dishwasher door, near the top.
- Once you’ve filled the rinse aid dispenser and adjusted the rinse aid setting (if applicable), you can run the dishwasher as usual.
Dishwashers have become an indispensable part of modern kitchens, making dishwashing a breeze. However, to ensure that your dishes come out sparkling clean and free of streaks, you need to use rinse aid. Rinse aid helps to reduce water spots and film on your dishes, leaving them looking their best. If you have a Whirlpool dishwasher, here’s a step-by-step guide on how to fill the rinse aid dispenser:
Step 1: Locate the Rinse Aid Dispenser
The rinse aid dispenser in a Whirlpool dishwasher is typically located on the inside of the dishwasher door, near the top. It’s usually a small, round or square-shaped compartment with a cap or lid.
Step 2: Open the Rinse Aid Dispenser
To open the rinse aid dispenser, press down on the cap or lid and pull it towards you. This will reveal the rinse aid reservoir.
Step 3: Fill the Rinse Aid Reservoir
Pour rinse aid into the reservoir until it reaches the “Full” or “Max” line. Do not overfill the reservoir, as this can cause problems with the dishwasher’s performance.
Step 4: Close the Rinse Aid Dispenser
Once the reservoir is filled, close the cap or lid securely. Make sure it’s closed tightly to prevent rinse aid from leaking out.
Step 5: Adjust the Rinse Aid Setting
Some Whirlpool dishwashers have an adjustable rinse aid setting. This setting allows you to control the amount of rinse aid that is dispensed during each wash cycle. If your dishwasher has this setting, adjust it according to the manufacturer’s instructions.
Step 6: Run the Dishwasher
Once you’ve filled the rinse aid dispenser and adjusted the rinse aid setting (if applicable), you can run the dishwasher as usual. The rinse aid will be automatically dispensed during the rinse cycle.
Tips for Using Rinse Aid in a Whirlpool Dishwasher
- Use a rinse aid that is specifically designed for dishwashers.
- Avoid using too much rinse aid, as this can leave a film on your dishes.
- If you have hard water, you may need to use more rinse aid to prevent water spots.
- Clean the rinse aid dispenser regularly to prevent buildup.
Troubleshooting Rinse Aid Problems in a Whirlpool Dishwasher
If you’re having problems with rinse aid in your Whirlpool dishwasher, here are a few things you can try:
- Make sure that the rinse aid dispenser is filled and that the cap is closed securely.
- Check the rinse aid setting on your dishwasher and adjust it if necessary.
- Clean the rinse aid dispenser regularly to prevent buildup.
- If you’re still having problems, you may need to contact a qualified appliance repair technician.
Conclusion: The Secret to Sparkling Clean Dishes
By following these simple steps, you can ensure that your Whirlpool dishwasher is dispensing the right amount of rinse aid to leave your dishes sparkling clean and free of streaks. With regular use of rinse aid, you can keep your dishes looking their best for years to come. So, make rinse aid a part of your dishwasher routine and enjoy the benefits of sparkling clean dishes every time.
