How To Drain Kenmore Dishwasher With Standing Water: Quick And Easy Steps For A Hassle-free Cleanup
What To Know
- One common problem is standing water in the dishwasher, which can be caused by a variety of factors, such as a clogged drain hose, a faulty drain pump, or a malfunctioning control board.
- This guide will walk you through the steps on how to drain a Kenmore dishwasher with standing water, so you can get your dishes clean and your dishwasher back in working order in no time.
- To turn off the water supply, locate the water shutoff valve for the dishwasher, which is usually located under the sink or behind the dishwasher.
Kenmore dishwashers are known for their reliability and efficiency, but even the best appliances can experience occasional issues. One common problem is standing water in the dishwasher, which can be caused by a variety of factors, such as a clogged drain hose, a faulty drain pump, or a malfunctioning control board. If you find yourself with a Kenmore dishwasher full of water that won’t drain, don’t panic! This guide will walk you through the steps on how to drain a Kenmore dishwasher with standing water, so you can get your dishes clean and your dishwasher back in working order in no time.
Before you begin any troubleshooting or repairs, it’s important to disconnect the dishwasher from the power source and turn off the water supply. This will help prevent any electrical hazards or water damage.
To unplug the dishwasher, simply grasp the plug and pull it straight out of the outlet. To turn off the water supply, locate the water shutoff valve for the dishwasher, which is usually located under the sink or behind the dishwasher. Turn the valve clockwise until it’s completely closed.
Step 2: Remove the Standing Water
Once the dishwasher is disconnected from the power and water supply, you can begin removing the standing water. There are two ways to do this:
1. Use a Wet/Dry Vacuum Cleaner: Place the nozzle of the vacuum cleaner in the bottom of the dishwasher and turn it on. Be sure to use the wet setting, as this will help prevent damage to the vacuum cleaner. Continue vacuuming until all of the water has been removed.
2. Use a Bucket and Sponge: If you don’t have a wet/dry vacuum cleaner, you can use a bucket and sponge to remove the standing water. Place the bucket under the dishwasher and use the sponge to soak up the water. Wring out the sponge as needed and continue until all of the water has been removed.
Step 3: Inspect the Drain Hose
Once the standing water has been removed, inspect the drain hose for any clogs or kinks. The drain hose is typically located at the bottom of the dishwasher, near the back. Look for any visible damage or obstructions, such as food particles, grease, or debris. If you find any clogs, use a pair of pliers or a drain snake to remove them.
Step 4: Check the Drain Pump
If the drain hose is clear, the next step is to check the drain pump. The drain pump is responsible for pumping the water out of the dishwasher. To access the drain pump, you will need to remove the lower access panel of the dishwasher. Once the panel is removed, locate the drain pump, which is usually a small, round device with a motor attached to it.
Inspect the drain pump for any signs of damage or wear. Look for any loose wires, broken connections, or burnt-out components. If you find any damage, you will need to replace the drain pump.
Step 5: Test the Dishwasher
Once you have inspected the drain hose and drain pump, it’s time to test the dishwasher to make sure it’s draining properly. To do this, simply reconnect the dishwasher to the power and water supply and run a test cycle. If the dishwasher drains properly, the problem is solved. If the dishwasher still doesn’t drain, you may need to call a qualified appliance repair technician for further assistance.
Troubleshooting Tips
If you are still having trouble draining your Kenmore dishwasher, here are a few additional troubleshooting tips:
- Check the air gap. The air gap is a small device that is installed on the countertop near the sink. It helps prevent water from backing up into the dishwasher. If the air gap is clogged, it can cause the dishwasher to drain slowly or not at all.
- Clean the dishwasher filter. The dishwasher filter is located at the bottom of the dishwasher, near the drain. It helps trap food particles and other debris from entering the drain hose. If the filter is clogged, it can cause the dishwasher to drain slowly or not at all.
- Reset the dishwasher. Sometimes, a simple reset can fix a dishwasher that is not draining properly. To reset the dishwasher, simply unplug it from the power outlet for a few minutes, then plug it back in.
Conclusion: Kenmore Dishwasher Drain Issues Resolved
By following the steps outlined in this guide, you should be able to successfully drain a Kenmore dishwasher with standing water. If you are still experiencing problems, you may need to call a qualified appliance repair technician for further assistance. With a little troubleshooting, you can get your Kenmore dishwasher back in working order and your dishes sparkling clean in no time!