What To Know
- Use a screwdriver to remove the screw that secures the blade to the base.
- Use a damp cloth to wipe down the exterior of the motor housing.
- Ensure the juicer is properly plugged in and the base is securely attached to the motor housing.
The NutriBullet juicer is a popular kitchen appliance that makes it easy to enjoy fresh, healthy juices. However, if you need to clean or repair your juicer, you’ll need to know how to disassemble it. This comprehensive guide will provide you with step-by-step instructions on how to disassemble your NutriBullet juicer, ensuring you can maintain and care for it effortlessly.
Materials Required
- Clean cloth or paper towels
- Screwdriver (if needed)
Step-by-Step Disassembly Instructions
1. Unplug the Juicer
Before you begin disassembling the juicer, ensure it is unplugged from the power outlet for safety.
2. Remove the Extractor Blade
- Grasp the extractor blade assembly and twist it counterclockwise to detach it from the base.
- Be careful not to touch the blades as they are sharp.
3. Disassemble the Extractor Blade Assembly
- Hold the extractor blade assembly upside down.
- Use a screwdriver to remove the screw that secures the blade to the base.
- Carefully remove the blade and rinse it thoroughly.
4. Remove the Lid Gasket
- Locate the rubber gasket around the rim of the lid.
- Gently pull the gasket out of its groove.
- Wash the gasket with warm soapy water and dry it thoroughly.
5. Remove the Lid
- Lift the lid straight up to remove it from the base.
- Clean the lid and its components with a damp cloth.
6. Remove the Base
- Turn the juicer upside down.
- Unscrew the base from the motor housing.
- Rinse the base with warm soapy water and dry it thoroughly.
7. Clean the Motor Housing
- Use a damp cloth to wipe down the exterior of the motor housing.
- Do not immerse the motor housing in water.
Reassembly Instructions
To reassemble the juicer, follow the disassembly instructions in reverse order:
1. Insert the base into the motor housing.
2. Screw the base onto the motor housing.
3. Place the lid on the base.
4. Insert the lid gasket into its groove.
5. Reassemble the extractor blade assembly.
6. Attach the extractor blade assembly to the base.
7. Plug the juicer into the power outlet.
Tips for Disassembly
- If you encounter any resistance when disassembling the juicer, do not force it. Refer to the user manual or contact customer support for assistance.
- Be careful not to damage the electrical components of the juicer.
- Clean all parts of the juicer thoroughly after each use to ensure optimal performance.
- If you have any questions or concerns, refer to the user manual or seek professional assistance.
Troubleshooting Common Issues
- Juicer is not working: Ensure the juicer is properly plugged in and the base is securely attached to the motor housing.
- Leaking: Check the lid gasket for damage or wear and replace it if necessary.
- Blades are dull: Sharpen or replace the blades as needed.
- Motor is overheating: Allow the juicer to cool down before using it again. If the problem persists, contact customer support.
What People Want to Know
1. How often should I disassemble my NutriBullet juicer for cleaning?
Disassemble and clean your juicer after each use to maintain optimal hygiene and performance.
2. Can I put the NutriBullet juicer parts in the dishwasher?
Only the lid, lid gasket, and base are dishwasher safe. The extractor blade assembly and motor housing should be hand-washed.
3. Where can I find replacement parts for my NutriBullet juicer?
Replacement parts can be purchased from the official NutriBullet website or authorized retailers.
