What To Know
- Use a soft sponge or brush to gently clean the inside and outside of the pitcher, paying attention to any crevices or corners.
- If your juicer becomes heavily soiled, you can soak the pitcher and blade assembly in a solution of vinegar and water for 30 minutes before cleaning as usual.
- If pulp becomes stuck on the blade, soak it in hot water for a longer period or use a toothpick to gently remove it.
Maintaining a clean and hygienic NutriBullet Juicer Pro is crucial for optimal performance and longevity. This comprehensive guide will provide you with step-by-step instructions and essential tips to ensure your juicer remains in pristine condition.
Disassembling the NutriBullet Juicer Pro
1. Unplug the Base Unit: Always unplug the juicer from the power outlet before disassembling.
2. Remove the Pitcher: Lift the pitcher straight up and off the base unit.
3. Unscrew the Blade Assembly: Turn the blade assembly counterclockwise to detach it from the pitcher.
4. Separate the Blade and Gasket: Carefully remove the blade from the gasket.
Cleaning the Pitcher
1. Rinse with Water: Rinse the pitcher thoroughly with clean water to remove any residual pulp or juice.
2. Use Dish Soap: Fill the pitcher with warm water and add a few drops of dish soap. Swirl the water around to create a soapy solution.
3. Brush with a Soft Sponge: Use a soft sponge or brush to gently clean the inside and outside of the pitcher, paying attention to any crevices or corners.
4. Rinse Again: Rinse the pitcher thoroughly with clean water to remove any soap residue.
Cleaning the Blade Assembly
1. Soak in Hot Water: Fill a small bowl with hot water and submerge the blade assembly for 15-20 minutes. This will help loosen any stuck-on pulp or debris.
2. Brush with a Soft Toothbrush: Use a soft toothbrush to gently scrub the blade and gasket, removing any remaining pulp or debris.
3. Rinse Thoroughly: Rinse the blade assembly thoroughly with clean water to remove any remaining soap or debris.
Cleaning the Base Unit
1. Wipe with a Damp Cloth: Use a damp cloth to gently wipe down the base unit, removing any splashes or residue.
2. Do Not Submerge: Never submerge the base unit in water or any other liquid. This could damage the electrical components.
Reassembling the NutriBullet Juicer Pro
1. Attach the Blade to the Gasket: Carefully place the blade back onto the gasket, ensuring it fits snugly.
2. Screw on the Blade Assembly: Screw the blade assembly back onto the pitcher, turning it clockwise until it is securely tightened.
3. Place the Pitcher on the Base Unit: Align the pitcher with the base unit and press down firmly until it clicks into place.
Essential Tips for Cleaning
- Clean your NutriBullet Juicer Pro immediately after each use to prevent pulp or debris from drying and becoming difficult to remove.
- Use a soft sponge or brush to avoid scratching the plastic components.
- Do not use abrasive cleaners or harsh chemicals, as these can damage the juicer.
- If your juicer becomes heavily soiled, you can soak the pitcher and blade assembly in a solution of vinegar and water for 30 minutes before cleaning as usual.
Troubleshooting Common Cleaning Issues
- Stuck Pulp on the Blade: If pulp becomes stuck on the blade, soak it in hot water for a longer period or use a toothpick to gently remove it.
- Leaking Pitcher: If the pitcher leaks, check the gasket for any damage or wear. If the gasket is damaged, replace it with a new one.
- Unresponsive Base Unit: If the base unit does not respond when you press the button, unplug the juicer and reassemble it. If the problem persists, contact customer support.
The Bottom Line: Maintaining a Pristine NutriBullet Juicer Pro
By following these simple steps and adhering to the essential tips outlined above, you can effectively clean your NutriBullet Juicer Pro and ensure its optimal performance and longevity. A clean juicer not only produces healthier juices but also extends its lifespan, providing you with years of nutritious and refreshing beverages.
Frequently Asked Questions
Q: How often should I clean my NutriBullet Juicer Pro?
A: It is recommended to clean your NutriBullet Juicer Pro after each use to prevent the accumulation of pulp or debris.
Q: Can I put the NutriBullet Juicer Pro in the dishwasher?
A: No, the NutriBullet Juicer Pro is not dishwasher safe. It should be cleaned by hand using warm water and dish soap.
Q: What happens if I use harsh chemicals to clean my NutriBullet Juicer Pro?
A: Using harsh chemicals can damage the plastic components and void the warranty. Always use mild dish soap and a soft sponge or brush for cleaning.
