What To Know
- Place the strainer basket over the auger, aligning the tabs with the slots in the base.
- Place the juice bowl under the pulp collector, aligning the tabs with the slots in the base.
- Place the lid on top of the juicer, aligning the tabs with the slots in the base.
Assembling a Champion juicer can be a daunting task if you don’t have the right instructions. This comprehensive guide will provide you with step-by-step instructions, along with clear images, to help you assemble your Champion juicer effortlessly. By following these instructions, you can ensure that your juicer is properly assembled and ready to use in no time.
Step 1: Gather the Necessary Tools and Parts
Before you begin, make sure you have all the necessary tools and parts:
- Champion juicer base
- Auger
- Strainer basket
- Pulp collector
- Juice bowl
- Lid
- Pusher
Step 2: Insert the Auger
1. Hold the auger vertically and insert the smaller end into the base of the juicer.
2. Push the auger down until it fits snugly into the base.
Step 3: Install the Strainer Basket
1. Place the strainer basket over the auger, aligning the tabs with the slots in the base.
2. Twist the strainer basket clockwise to lock it in place.
Step 4: Attach the Pulp Collector
1. Slide the pulp collector over the strainer basket, ensuring that it fits securely.
Step 5: Place the Juice Bowl
1. Place the juice bowl under the pulp collector, aligning the tabs with the slots in the base.
2. Twist the juice bowl clockwise to lock it in place.
Step 6: Secure the Lid
1. Place the lid on top of the juicer, aligning the tabs with the slots in the base.
2. Twist the lid clockwise to lock it in place.
Step 7: Insert the Pusher
1. Insert the pusher into the lid, aligning the notches with the tabs.
2. Push the pusher down until it fits snugly into place.
Tips for Proper Assembly
- Ensure that all parts are clean and dry before assembling.
- Tighten all components securely to prevent leaks.
- Check the juicer for any loose parts or damage before using it.
- If you encounter any difficulties during assembly, refer to the manufacturer’s manual.
Troubleshooting Common Assembly Issues
- Leaking: Check if all components are properly tightened.
- Juicer not starting: Ensure that the juicer is plugged in and the lid is securely locked in place.
- Excessive pulp in the juice: Adjust the pressure of the pusher or use a finer strainer basket.
Quick Answers to Your FAQs
Q: Can I assemble the juicer without the pusher?
A: No, the pusher is required to safely operate the juicer and prevent injury.
Q: How often should I clean the juicer?
A: Ideally, clean the juicer after each use to prevent bacteria growth.
Q: Can I use the juicer to extract other liquids, such as milk or soup?
A: No, the Champion juicer is specifically designed for juicing fruits and vegetables.
Q: What is the recommended speed for juicing?
A: Most Champion juicers operate at a speed of 80-100 RPM.
Q: Can I juice frozen fruits or vegetables?
A: Yes, but it is recommended to thaw them slightly before juicing to prevent damage to the juicer.
